SpectraPure CSPDI-180 Installation And Operating Manual page 17

SpectraPure
8. Place the black housing O -ring on the housing rim and carefully screw
the lid back on to the base.
9. Reconnect the black tubing to the membrane feed push fitting.
NOTE: If you have a dual-membrane system, perform steps 2 thru 9 on
the second membrane now.
* If the replacement membrane is rated identical in gallons per day to
the original membrane:
1. Disconnect the yellow concentrate tubing (page 11) from the membrane
housing. Remove flow restrictor and set aside.
2. Reconnect yellow concentrate tubing back to membrane housing and
run water through system for at least 2 gallons. (This step will flush out
membrane preservatives.)
3. Reinsert flow restrictor and check for leaks. Allow at least 2 gallons of
water to run through the system before using water.
SpectraPure
E-mail: sales@spectrapure.com Visit us on the web www.spectrapure.com
Housing O -Ring
Inc .
®
Fax 480.894.6109 Fax us toll-free 1.877.527.7873
®
17