Expansion Enclosure - IBM Storwize V7000 Unified Quick Installation Manual

Figure 31. Secure the cable management arm and the file module in the rack for shipping if
needed.
8. Slide the file module into the rack until it snaps into place. To slide the file
Figure 32. Install the front screws.
Step 10. Connecting the SAS cables to the expansion enclosures
Connect the SAS cables to the expansion enclosures.
About this task
This task applies if you are installing one or more expansion enclosures.
Note: The enclosure terminology that is used in this topic is described fully in Step
2. Identifying the hardware components.
Be aware of these guidelines when you begin to attach the cables to the SAS ports:
module out of the rack, press on the release latches 1 .
Note: When you move the rack cabinet, or if you install the rack cabinet in a
vibration-prone area, insert the M6 screws 2 in the front of the file module.
1
2
Chapter 2. Performing the hardware installation
43