IBM Storwize V7000 Unified Quick Installation Manual page 62

Figure 29. Adjust the location of the cable management arm.
6. Attach the power cords and other cables to the rear of the file module
Figure 30. Connect and route the cables.
7. Insert the M6 screws to the rear of the slides. Use a cable tie to secure the free
42
IBM Storwize V7000 Unified: Model 2073-720 Quick Installation Guide
(including keyboard, monitor, and mouse cables, if required).
Route the cables and power cords on the cable management arm 1 and
secure them with cable ties or hook-and-loop fasteners.
Note: Allow slack in all cables to avoid tension in the cables as the cable
management arm moves.
end of the cable management arm to the rack, if needed.
1