IBM Storwize V7000 Unified Quick Installation Manual page 86

3. Wait for the blue identify indicator on each file module to go out or to start
4. Insert the USB flash drive into a Windows PC and run the initialization tool
5. If this part of the initial setup of the system completes successfully, the
6. If there was a problem with this part of the initial setup, the initialization tool
7. If the initial setup does not complete successfully, the management GUI
Step 18. Using the management GUI to complete the initial
configuration of the system
Use the management GUI to complete the initial configuration of your system.
About this task
You should have completed the tables in "Information required before starting
initial configuration of your system" on page 15 so that you have all of the
configuration data ready to complete this task.
Note that the management GUI includes integrated help. If you move your cursor
over certain terms or objects, a question mark appears. Moving your cursor over
the question mark displays a description of that term. In other areas of the
interface, additional information is available through Learn more links. You can
also get help at any time after the initial configuration of the system by clicking the
Help link in the top right hand corner of management GUI.
See the Getting started, listed under Learning and tutorials in the Information
Center for a demonstration of this task.
What to do next
You will only be able to access the management GUI after the Initialization Tool
part of the Initial setup has completed successfully. If you log on to the
management GUI before the initial setup of the system has completed, then you
will see an indication of the progress towards completion of initial setup. If you
log on to the management GUI for the first time after the initial setup of the
system has completed, then you will be shown the licence agreement. Proceed as
follows:
1. Log in to the management GUI with the default user ID admin and the default
2. Read and accept the license agreement.
3. At the System License window, leave the values at 0 if you are not using this
4.
66
IBM Storwize V7000 Unified: Model 2073-720 Quick Installation Guide
blinking again. This should only take a few minutes, but it might take more
than one hour if the Storwize V7000 Unified software level is older than 1.3.2.
executable program that is on the USB flash drive.
initialization tool provides a link to the management GUI where you can view
the progress to completion of the initial setup task.
provides the error code and links you to the Information Center page that helps
you troubleshoot the problem.
provides the error code and links you to the Information Center page that helps
you to troubleshoot the problem.
password admin.
feature. For more information about external virtualization go to
www.ibm.com/storage/support/storwize/v7000. In the Search support box
enter external virtualization.
Complete the system attributes as required. Refer to Table 6 on page 17.