IBM Storwize V7000 Unified Quick Installation Manual page 47

Table 13. NIS configuration information (continued)
Field Value
Use Id Map [ ] Use ID Map - NIS is used to map
UNIX IDs to Windows IDs for an
environment where Active Directory or
Samba Primary Domain Controller
(PDC) is used for Authentication.
ID MAP USER
RANGE
ID MAP GROUP
RANGE
Note
If the NIS Mode is Basic, leave this field blank.
If you checked NIS - NFS NetGroup support
without User ID Mapping in the Options field
of Table 10 on page 22, leave this field blank.If
you checked NIS - NFS NetGroup support with
User ID Mapping in the Options field of
Table 10 on page 22, then check the Use ID Map
field.
If the Use ID Map field is blank, leave this field
blank.
If the Use ID Map field is checked AND at least
one User Map rule is AUTO then you must
specify a User Range and/or a Group Range.
Example: 10000-20000.
Note: The User Range values must be a
minimum of 1024.
If the Use ID Map field is blank, leave this field
blank.
If the Use ID Map field is checked AND at least
one User Map rule is AUTO then you must
specify a User Range and/or a Group Range.
Example: 30000-40000.
Note: The Group Range values must be a
minimum of 1024.
Chapter 1. Before you begin the installation
27