IBM Storwize V7000 Unified Quick Installation Manual page 22

Control enclosure ship contents:
__ v Control enclosure (models 2076-112, 2076-124, 2076-312, or 2076-324). The last
__ v Rack-mounting hardware kit, including:
__ v Two power cords
__ v Drive assemblies or blank carriers (installed in the enclosure).
Other items shipped with control enclosure:
__ v Read first flyer
__ v Quality hotline flyer
__ v Environmental notices CD
__ v Environmental flyers
__ v Safety notices
__ v Limited Warranty information
__ v License information
__ v License Function authorization document
__ v IBM Storwize V7000 Unified Quick Installation Guide
__ v Storwize V7000 Unified Problem Determination Guide
__ v One USB flash drive, also known as a flash drive, is located with the
Additional components for control enclosure:
__ v Fibre Channel cables, if ordered
__ v Small form-factor pluggable (SFP) transceivers that are preinstalled in the
__ v Longwave SFP transceivers, if ordered
Additional components for expansion enclosures:
__ v Two SAS cables for each expansion enclosure
Two file modules. Each file module box contains:
__ v File module (server)
__ v Rack-mounting hardware kit, including:
2
IBM Storwize V7000 Unified: Model 2073-720 Quick Installation Guide
two digits of the model number identify the number of drive slots, either 12
or 24.
__ – Two rails (right and left assembly)
__ – Two M5 x 15 Hex Phillips screws per rail (two rails)
__ – Two M5 x 15 Hex Phillips screws per chassis
Note: Two parts of the rail kit are attached to each side of the enclosure.
Verify the number of drives and the size of the drives.
publications.
enclosure
__ – Two sets of two rails (right and left assembly)
__ – Large cable tie
__ – Cable ties
__ – Two sets of four M6 screws per rail (two rails)
__ – Two sets of two 10-32 screws per chassis
__ – Cable management support arm
__ – Cable management arm mounting bracket
__ – Cable management arm stop bracket