IBM Storwize V7000 Unified Quick Installation Manual page 27

Figure 7. SAS ports and LEDs in rear of expansion enclosure
Each canister has two SAS ports that are numbered 1 on the left 1 and 2 on the
right 2 . Port 1 must be connected if you are adding one expansion enclosure.
Port 2 must be connected if you are adding a second expansion enclosure.
Note: The reference to the left and right locations applies to canister 1, which is
the upper canister. The port locations are inverted for canister 2, which is the lower
canister.
File module
Figure 8 identifies the various ports and hardware in the front of the file module.
Each enclosure takes up the full 2U height in the rack. See the Storwize V7000
Unified Problem Determination Guide PDF on the CD for the full descriptions of the
hardware components.
1 2
Storwize V7000 Unified Storwize V7000 Unified
Figure 8. Front view of 2073-720 file module
1 File module label with MTM (machine type model) and S/N (serial number)
v
2 Boot drives
v
3 Video port
v
4 Advanced operator panel.
v
5 USB ports
v
1 2
2
1
3
5 6
Chapter 1. Before you begin the installation
4
7