Oki POCKET PRINT 6010E User Manual page 76

Section III - NetWare
Columns
Column information for each print server can be modi-
fied. To define the location of a new column, select the
location in the Columns Displayed field where you wish
the new column to be inserted, then select Add. If no
location is selected, the new column will be added to
the end of the list and the column will be displayed to
the right of the last column on the screen. For example,
if you currently have three columns displayed and you
wish to add a fourth column to the far left of the screen,
follow these steps:
1. Select the first column in the Columns
Displayed field.
2. Select the column to be added from the
Columns Available field.
3. Select Add.
Columns may also be removed by selecting Remove
from the Columns Available field.
Refresh
The refresh rate defines how often the OkiNet for
NetWare utility updates the main print server list. To
define a refresh rate, select the Automatic Refresh box
and then enter the refresh rate in the field provided.
Decide how frequently to refresh the screen based on
factors such as network traffic and desire for most
recent information. For example, if traffic is not an issue
on your network and the most current information is
desired, set the refresh rate to 1 so the screen is updated
every minute. If network traffic is an issue, you may
wish to set the refresh rate to 10. This would update the
screen every ten minutes and minimize network traffic.
III - 26 OKI OkiLAN 6010e User's Guide