Configuring Sco Unix For Printing With The Okilan 6010E - Oki POCKET PRINT 6010E User Manual

Section IV - TCP/IP
6. Pull down the Lists menu and select Exit.
7. Select the Exit SAM button.
8. Test printing to the OkiLAN 6010e with the
following command:
Configuring SCO UNIX for Printing with
the OkiLAN 6010e
This application note describes the configuration of the
printing system on the Santa Cruz Operation's (SCO)
version of the UNIX operating system. For clarity and
brevity, the following specific names will be used to
represent general devices or concepts.
lj4 – The local queue name of the SCO
system to which print jobs that are destined
for a printer attached to the OkiLAN 6010e
will be directed.
OKIPRINTER – The host name of the
remote system which is the OkiLAN 6010e.
For example, to telnet to the OkiLAN 6010e
and invoke the OkiLAN 6010e Configura-
tion utility, you would type telnet
OKIPRINTER. A host name is not required
for the OkiLAN 6010e, the IP address may
be used.
IV - 94 OKI OkiLAN 6010e User's Guide
lp –d lj4 filename