Appendix A: Troubleshooting; Main Status Indicator; Restoring The Okilan 6010E To Factory Defaults - Oki POCKET PRINT 6010E User Manual

Appendix A: Troubleshooting

Main Status Indicator

Upon power-up, the main status indicator flashes
orange. It changes to green when the OkiLAN 6010e
passes self-test. The indicator stays orange if the
OkiLAN 6010e fails self-test. If the indicator turns solid
orange due to an error, a configuration sheet will be
printed automatically. Check the error message reported
on the configuration sheet.
Restoring the OkiLAN 6010e to Factory
Defaults
In most cases, the best way to restore the OkiLAN
6010e to factory defaults is via telnet. However, if you
are unable to connect to the device because of a con-
figuration error, use the following method which does
not require a network connection.
To restore the OkiLAN 6010e to factory defaults,
complete the following steps:
1. Power down the OkiLAN 6010e.
2. While holding in the Print Configuration
Sheet Test button, power up the OkiLAN
6010e. Hold the button until the status
indicator turns solid green.
3. Power cycle the OkiLAN 6010e. It will have
restored itself to defaults.
OKI OkiLAN 6010e User's Guide
Section IV - TCP/IP
IV - 61