Oki POCKET PRINT 6010E User Manual page 185

yourqueuename – This is the name of the
queue on the OkiLAN 6010e and must end
with 1, 2, 3 or 4 depending on the port
selected to service the print jobs.
If FF, LF or NF are the last two letters of the
queue name, the job will be converted
accordingly. See pages 13 and 14 for more
information on remote queue names.
Prerequisites
Before you proceed, verify that the following prerequi-
sites are met:
1. SCO TCP/IP version 1.2 or later must be
installed.
2. The name of the OkiLAN 6010e
(OKIPRINTER) and the IP address you
wish to assign are in the "/etc/hosts" file of
the SCO machine.
3. The IP address of the OkiLAN 6010e has
been assigned and you are able to telnet to
OKIPRINTER successfully.
Procedure
1. Login to the SCO machine as root.
2. Install Remote Line Printing or verify that it
is running by typing mkdev rlp at the UNIX
prompt. It will respond by asking if you
want to install or remove remote line print-
ing. Choose Install even if remote line
printing may already be installed.
OKI OkiLAN 6010e User's Guide
Section IV - TCP/IP
IV - 95