Configuring Hp-Ux V10.Xx For Printing With The Okilan 6010E - Oki POCKET PRINT 6010E User Manual

7. Select the Exit SAM button.
8. Test printing to the OkiLAN 6010e with the
following command:
lp –d lj4 filename
Configuring HP-UX v10.xx for Printing
with the OkiLAN 6010e
This application note describes the configuration of the
printing system on the HP-UX ver. 10.xx of the UNIX
operating system. For clarity and brevity, the following
specific names will be used to represent general devices
or concepts.
lj4 – The local queue name on the HP-UX
system to which print jobs will be directed.
The print jobs are destined for a printer
attached to the OkiLAN 6010e.
OKIPRINTER – The host name of the
remote system which is the OkiLAN 6010e.
For example, to telnet to the OkiLAN 6010e
and invoke the OkiLAN 6010e Configura-
tion utility, you would type telnet
OKIPRINTER. A host name is not required
for the OkiLAN 6010e, the IP Address may
be used.
yourqueuename – This is the name of the
queue on the OkiLAN 6010e and must end
with 1, 2, 3 or 4, depending on the port
selected to service the print jobs.
OKI OkiLAN 6010e User's Guide
Section IV - TCP/IP
IV - 89