Oki POCKET PRINT 6010E User Manual page 159

Section IV - TCP/IP
If the ping succeeds, try ftping a test file to
the print server. If the ping fails, you might
have a configuration problem with the
OkiLAN 6010e (the IP address or gateway
address might be incorrect, etc.).
If the ftp succeeds, there is a problem with
the lpr/lp setup. Verify the hostname or IP
address is correctly set for the queue. Try
doing an lpstat (System V) or lpq (BSD) to
query the status of the OkiLAN 6010e.
FTP
If the indicator blinks green, the printer is
receiving data. If nothing is actually print-
ing, check the printer settings. For example,
if you are using a PostScript printer, verify
the OkiLAN 6010e is set to PostScript also.
Try pinging the device by its IP address (not
the hostname). This will verify the OkiLAN
6010e is functioning on the network.
If you cannot connect over ftp but the ping
succeeds, try telneting to the OkiLAN 6010e
and print a configuration page to verify
settings. If that fails, you might have a TCP/
IP configuration problem with the OkiLAN
6010e.
OKI OkiLAN 6010e User's Guide IV - 69