Basx Pt-100 Remote Control - Emotiva BASX PT-100 User Manual

BasX PT-100 Stereo Preamp / DAC / Tuner

BasX PT-100 Remote Control

1. Power Button
This button is used to toggle the PT-100 between Standby and On modes.
Note: The Remote Control will only operate when the AC Power Switch on the rear panel of the
PT-100 is On.
2. Navigation Ring / Buttons
In normal operation, pressing the Left and Right arrows will switch Inputs on the PT-100, and
the Up and Down arrows will raise and lower the Volume. When the Setup Menu is engaged, the
arrows are used for menu navigation.
3. Menu Button
This button toggles the Setup Menu on and off.
4. Mute Button
Press this button to mute the audio output on the PT-100; press it again to return the audio to its
previous level.
4. Stereo / Mono Button
Pressing this button when you're using the Tuner on the PT-100 switches between FM Stereo and
FM Mono. (Stations that are noisy or weak in Stereo often sound better when listened to in Mono.)
Note: The Stereo/Mono button ONLY affects the FM Tuner; it will NOT convert stereo audio
signals from other inputs to monaural.
1
2
3
ST/M
Page 12
4
5