Emotiva BASX PT-100 User Manual page 21

BasX PT-100 Stereo Preamp / DAC / Tuner
Configuring FM Station Presets
The following section describes how to configure the FM Station Presets on your PT-100.
We suggest you read the following instructions carefully before configuring the FM Station
Presets on your PT-100 for the first time.
Note: Using the Autotune feature will ERASE all your current Station Presets and replace them
with the stations discovered by the Autotune signal scan process.
Note: The Reset function will reset all configuration settings in the PT-100. This will erase your
Station Presets.
The process of setting FM Station Presets on the PT-100 is relatively simple.
For each FM Station Preset you wish to set you will:
• Select the frequency of the station you wish to save.
• Instruct the PT-100 that you wish to save it.
• Set the Station Preset number where you want to save that station.
• Tell the PT-100 to go ahead and save the selected frequency to that Station Preset.
To configure an FM Station Preset:
• While the Tuner Input is selected, press the Menu Button or the Volume knob to enter the
Setup Menu.
• Press the Right Arrow button to enter the Tuner Sub-menu.
• Rotate the Volume knob to Seek and press the Right Button (to find a station automatically) or
Rotate the Volume knob to Frequency and press the Right Button (to manually tune a station)
• Find or manually enter the frequency of the station you want to save.
• Use the Left Button to return to the Tuner Sub-menu
• Use the Volume knob to move to the Save option
• Press the Right Button to select the Save option.
Note: The frequency you now see displayed is the one you just selected, but the Station Preset is
the one that was selected when you entered the Menu. Therefore, you should ignore the Station
Preset that is initially displayed and select the Station Preset number that you wish to use.
• Rotate the Volume knob to change the Station Preset number displayed to the one
you want to use.
• Press the Right Button to save the displayed combination of Station Preset and frequency.
At this point you may exit the Setup menu, or you may use the Left Button to return to the Tuner
Sub-menu and select another station to program.
Page 17