Front Feed - Oki Microline 8810 User Manual

Front Feed

Note The default setting is in
Item
Line Spacing
Form Tear-Off
Skip Over Perf.
Page Width
Page Length
TOF
Initial Pos.
PE Pos.
Paper End
Gap Control
Gap Pos.
bold blue
Settings
6LPI, 8LPI
Off, On
No, Yes
8". 10.6", 13.2",
8" = 203,20 mm, 10,6" = 269,24 mm, 13,2 = 335,28,
345,44
76.2 mm (3"), 82.6 mm (3.25"), 88.9 mm (3.5"), 101.6
mm (4"), 127.0 mm (8"), 139.7 mm (5.5"), 152.4 mm
(6"), 177.8 mm (7"), 203.2 mm (8"), 215.9 mm (8.5"),
279.4 mm (11"), 296.3 mm (11.67"), 304.8 mm
(12"), 355.6 mm (14"), 431.8 mm (17")
2.12 mm (1/12"), 3.18 mm (1/8"),
8.47 mm (1/3"), 10.58 mm (5/12"), 19.05 mm (9/12"),
23.28 mm (11/12"), 25.4 mm (1"), 27.52 mm
(13/12"), 1Chr. Set Pos.
Note: 1Chr. Set Pos. automatically appears as the
setting when the front panel has been used to set a
1Chr. Set Pos value for the Front Feed path. See
page 71.
Print, Tear Off
3.18 mm (1/8"),
On-Line, Off-Line
Auto, Manual Gap x
x = 1 to 8, A to E. See page 80.
50.8 mm (2"), 101.6 mm (4")
Microline 8810 User's Guide
type.
13.6"
6.35 mm (1/4")
42
13,6 =
6.35 mm (1/4"),