Cleaning The Feed Rolls - Oki ES6150 User Manual

C F R
LEANING THE EED
When feeding cannot be done, follow the procedure below to wipe the feed
roll gently with a well-wrung soft cloth.
There are feed rolls in the interior of this printer (two locations, total of
four), tray module (one location) and paper tray (one location). Follow the
cleaning procedure
Inside of Machine (Two Locations)
Open cover A and after removing the drum/toner cartridge, clean the feed
roll.
Tray Module (One Location)
Paper Tray (One Location)
Pull out the paper tray and clean the feed roll.
Cleaning Procedure
The following procedure explains how to clean the feed roll set in the paper tray. Follow this
procedure also when cleaning the feed rolls inside of the printer and the tray module.
NOTE
The feed roll is a regular replacement part.
1. Pull the paper tray out of the printer.
OLLS
(page 36) to clean the feed rolls at each location.
Even without uninstalling the tray module you can clean the feed roll
after pulling out the paper tray.
Daily Care > 36