Oki Microline 8810 User Manual page 68

TOF Adj. (CSSF)
Applies only when the optional CSF is mounted on the front of
the printer.
For fine tuning the Top of Form (TOF) location when the
front-mounted CSF is selected.
Available settings and information are the same as described for
TOF Adj. (Cut) above.
TOF ADj. (CSFR)
Applies only when the optional CSF is mounted on the rear of the
printer.
For fine tuning the Top of Form (TOF) location when the
rear-mounted CSF is selected.
Available settings and information are the same as described for
TOF Adj. (Cut) above.
Wait Time
Note Auto Alignment must be disabled to use Wait Time. See
page 50.
Choose the amount of time the printer waits for paper to be
inserted after print data is received when you are using manual
feed from the platform: 2.0 sec [the default], 1.5 sec, 1.0 sec,
or 0.5 sec.
Zero Character
The default is Unslashed. Change to Slashed if you wish to use a
slash to distinguish the number zero from the capital letter 0.
Microline 8810 User's Guide
68