Oki Microline 8810 User Manual page 21

2. Lift the lock lever on the left tractor, then move the left tractor to set the
desired left margin for printing.
• The ▼ mark on the gauge (1)—or the center of the diamond shaped
hole (2)—represents the location of the center of the first character
printed.
• For printing forms, move the left tractor to the right as far as it will
go (the movement of the left tractor is limited to ensure that the
paper covers the paper out sensor).
F5-04a.JPG
3. Push the lock lever down to lock the left tractor in place.
Microline 8810 User's Guide
21
8480_2_crop.JPG