Setting The Printhead Gap; General Information - Oki Microline 8810 User Manual

Setting the Printhead Gap

General Information

The printhead gap is the distance between the printhead and the platen.
Your printer comes from the factory set to automatically detect the printhead
gap (Auto Gap selected) for the media being fed in. Certain media, especially
media with uneven thickness, may not work well with the Auto Gap feature
and could produce unsatisfactory print results.
To correct for this, change from Auto Gap to a manually set gap. You may
need to experiment a bit to determine the best manual setting for a
particular media.
Note Because their thickness varies, envelopes do not work with Auto
Gap.
Microline 8810 User's Guide
78