Oki Microline 8810 User Manual page 41

CSF Rear
Note The default setting is in
Item
Line Spacing
Auto Eject Pos.
Page Width
Page Length
TOF
Eject Dir.
Auto Gap Timing
Gap Control
Gap Pos.
RemoveSheetWait
ManualFeedCSF
ManualSheetCSF
bold blue
Settings
6 LPI, 8 LPI
3.18 mm (1/8"),
8". 10.6", 13.2",
8" = 203,20 mm, 10,6" = 269,24 mm, 13,2 = 335,28,
345,44
76.2 mm (3"), 82.6 mm (3.25"), 88.9 mm (3.5"), 101.6
mm (4"), 127.0 mm (8"), 139.7 mm (5.5"), 152.4 mm
(6"), 177.8 mm (7"), 203.2 mm (8"), 215.9 mm (8.5"),
279.4 mm (11"), 296.3 mm (11.67"), 304.8 mm
(12"), 355.6 mm (14"), 431.8 mm (17")
2.12 mm (1/12"), 3.18 mm (1/8"),
7.62 mm (3/10"), 8.47 mm (1/3"), 10.58 mm (5/12"),
21.59 mm (0.85"), 23.28 mm (11/12"), 25.4 mm (1"),
27.52 mm (13/12"), 1Chr. Set Pos.
Note: 1Chr. Set Pos. automatically appears as the
setting when the front panel has been used to set a
1Chr. Set Pos value for the Manual Feed path. See
page 71.
Front, Rear
Every Paper, 1st Paper
Auto, Manual Gap x
x = 1 - 8, A - E. See page 80.
50.8 mm (2"), 101.6 mm (4")
Alarm, Wait Paper Feed
Valid, Invalid
CSF, Manual
Microline 8810 User's Guide
type.
6.35 mm (1/4")
13.6"
41
13,6 =
6.35 mm (1/4"),