Rear Feed - Oki Microline 8810 User Manual

Rear Feed

Note The default setting is in
Item
Line Spacing
Form Tear-off
Skip Over Perf.
Page Width
Page Length
TOF
Initial Pos.
PE Pos.
Paper End
Gap Control
Gap Pos.
bold blue
Settings
6LPI, 8LPI
Off, 500mS, 1 sec, 2 sec
No, Yes
8". 10.6", 13.2",
8" = 203,20 mm, 10,6" = 269,24 mm, 13,2 = 335,28,
= 345,44
76.2 mm (3"), 82.6 mm (3.25"), 88.9 mm (3.5"),
101.6 mm (4"), 127.0 mm (8"), 139.7 mm (5.5"),
152.4 mm (6"), 177.8 mm (7"), 203.2 mm (8"), 215.9
mm (8.5"), 279.4 mm
304.8 mm (12"), 355.6 mm (14"), 431.8 mm (17")
2.12 mm (1/12"), 3.18 mm (1/8"),
7.62 mm (3/10"), 8.47 mm (1/3"), 10.58 mm (5/12"),
21.59 mm (0.85"), 23.28 mm (11/12"), 25.4 mm (1"),
27.52 mm (13/12"), 1Chr. Set Pos.
Note: 1Chr. Set Pos. automatically appears as the
setting when the front panel has been used to set a
1Chr. Set Pos value for the Manual Feed path. See
page 71.
Print, Tear Off
3.18 mm (1/8"),
On-Line, Off-Line
Auto, Manual Gap x
x = 1 to 8, A to E. See page 80.
50.8 mm (2"), 101.6 mm (4")
Microline 8810 User's Guide
type.
13.6"
(11"), 296.3 mm (11.67"),
6.35 mm (1/4")
43
13,6
6.35 mm (1/4"),