Single Sheets to Continuous Forms
Manual Feed to Front Feed
1. With the printer turned on, press SEL to place the printer off line.
2. If there is a single sheet loaded into the printer, press LOAD to eject it.
3. Press MODE repeatedly until you see
display.
The printer switches paths and returns to the on-line state.
4. If there are continuous forms in the parked position, the printer
automatically pulls them into the print position.
5. If continuous forms are not loaded, the display prompts you to
PAPER
. Load continuous forms on the tractors (see page 20). Press
LOAD to advance them to the print position.
Continuous Forms to Single Sheets
Front Feed to Manual Feed
1. Press SEL to place the printer off line.
2. Press LOAD to park the continuous forms.
The continuous forms retract back to the tractors.
3. Press MODE repeatedly until you see
the display.
The printer switches paths and returns to the on-line state.
4. Load a sheet or form on the platform.
Microline 8810 User's Guide
24
FRONT
on the second line of the
MANUAL
on the second line of
INSERT