2
2-87 Installing Fiery software and fonts
To configure the connection for Fiery Spooler
1. Start the utility by double-clicking its icon.
2. Click Option.
3. Click Add.
4. Enter the appropriate information for the ES3640e MFP.
5. When you have entered all the information, click Add.
6. With the device name selected, click OK.
Fiery name and device
name (ES3640e MFP)
7. Click OK in the Configure dialog box.
ES3640e MFP EFI User's Software Installation Guide - 87
Configuring a connection for Fiery Spooler
Before you begin, print a Configuration page from the Printer
Control Panel and note the IP address of the ES3640e MFP. See
page
2-84.
The Chooser dialog box appears.
—Enter the IP address (or DNS name) of the ES3640e MFP.
Name
—Enter the name of the device that the Fiery is
New Device
installed in: ES3640e MFP. This device name appears in the Printer
Setup section of the Configuration page.
Type ES3640e MFP exactly as shown because the device
Note:
name is case-sensitive.
The ES3640e MFP appears in a list of configured servers.
The ES3640e MFP appears in a list of available servers.