Modifying The Configuration - Oki ES3640E MFP Software Manual

1
1-73 Using Fiery utilities for the first time
The Log In dialog box appears.
8. Select Administrator, Operator, or Guest and click Log In.
Your computer is connected to the server.

Modifying the configuration

Edit the configuration whenever there is any change to your Fiery
server or network, such as a server name or IP address. If you
change Fiery Setup information, do so before reconfiguring the
connection.
To modify the configuration
1. Start Command WorkStation.
The Login Server window appears.
2. Select the Fiery server for which you want to modify the configuration,
and click Remove.
The Available Servers dialog box appears.
3. To add the modified Fiery server, follows steps
procedure,
"To configure the connection for Command WorkStation"
ES3640e MFP EFI User's Software Installation Guide - 73
3 through 6 of the
on page 1-70.