Completing The Windows 2000/Xp/Server 2003 Printer Connection - Oki ES3640E MFP Software Manual

1
1-49 Setting up PostScript or PCL printing with Windows
6. Click OK.
Completing the Windows 2000/XP/Server 2003
printer connection
To print from Windows 2000/XP/Server 2003, you must:
• Set up network servers, if any.
• Set up the Fiery to accept print jobs from your computer.
• Configure a port on each Windows 2000/XP/Server 2003
computer for the network type.
Configure the parallel
connection
Configure the TCP/IP (LPR port)
connection
Configure the IPX (Novell)
connection
Note:
Windows 2000/XP and Windows Server 2003 are similar.
Windows 2000 illustrations are used in the following procedure,
with relevant Windows XP differences noted.
ES3640e MFP EFI User's Software Installation Guide - 49
To do this
The procedures for completing the printer connection for
See
"Completing the Windows
2000/XP/Server 2003 parallel port
connection" in this section.
"Completing the Windows
2000/XP/Server 2003 TCP/IP and
Port 9100 or LPR connection"
page 1-51.
"Completing the Windows
2000/XP/Server 2003 IPX (Novell)
connection" on page 1-52.
on