Oki ES3640E MFP Software Manual page 24

1
1-24 Installing User Software on a Windows Computer
9. Click the General tab.
10. Click Print Test Page and click OK.
11. In the Job Notes field, type user and job identification information, and
click OK.
If the Test page prints successfully, you are ready to print from
the computer.
Perform the following procedure in Windows 98/Me only if the
LPT1 port is not currently set to ECP Printer Port.
To prepare the port for parallel port printing
in Windows 98/Me
1. Click Start, choose Settings, and then choose Control Panel.
2. Double-click System.
The System Properties dialog box appears.
3. Click the Device Manager tab.
ES3640e MFP EFI User's Software Installation Guide - 24