Oki ES3640E MFP Software Manual page 69

1
1-69 Using Fiery utilities for the first time
4. When you have entered all the information, click Add.
5. With the device name (ES3640e MFP) selected in the Devices list, click
Device name of the
Fiery (ES3640e MFP)
6. With the device name selected in the list of Available Servers, click Select
ES3640e MFP EFI User's Software Installation Guide - 69
The nickname cannot contain any of the following seven
Note:
characters:
[ ] _ " ' <space> <tab>
—Choose the type of network protocol you are using from
Protocol
the menu.
Fiery utilities are not supported over IPX/SPX. Command
Note:
WorkStation is supported on Windows computers over TCP/IP.
—Enter the IP address (or DNS name) of the
Server Name
ES3640e MFP.
—Enter the name of the device the Fiery is installed
New Device
in: ES3640e MFP .
Type ES3640e MFP exactly as shown because the device
Note:
name is case-sensitive.
OK.
The Fiery appears in the list of available servers. The first line of
the entry displays the nickname you gave the server, followed by
the protocol you chose. The second line displays the device name.
to begin using the utility.