Microphone - MBTelehealth SX20 User Manual

MBTelehealth –
1. Move the camera to the desired position using the arrow keys and the zoom +/-.
2. Press the Home key
3. Select Camera Control from the menu on the left of the screen.
4. Select the Camera Presets softkey.
5. Scroll down using the arrow key and select Edit Camera Presets.
6. Press OK or press the forward arrow to bring up the preset listing.
7. Scroll down to the preset to be modified and click OK
8. Select Update to Current Camera Position.
The SX20 is set up with three (3) Standard Presets:
Camera presets will be set up and saved as part of equipment implementation but there
may be a need to change or resave presets
1. Sign – shows the site's sign with their site name. This is an off screen camera
view that allows users to move about the room without being on camera and
identifies the sites that are connected.
2. Participant (Presenter/Provider/Patient) – close up view of the person or
persons involved in the event. Whether it is the patient, provider or a presenter,
when setting this preset, you want to ensure that the far sites are able see the
person clearly.
3. Room –shows a view of everyone in the room. By setting a preset of the entire
room, you can easily identify everyone in attendance and then switch back to
preset number 2 as necessary. This preset is also helpful for question and
answer periods.

Microphone

1. Press the Mic Off
An onscreen indicator will appear when the microphone is off and the button on
the microphone will change to red.
2. Press the Mic Off key again to unmute. Indicator will show as green.
SX20 Quick Set with TRC5 Remote User Guide
Modify Existing Preset
.
Standard Presets
.
Mute and Unmute the Microphone
key on the remote control or on the microphone itself.
(or the forward arrow).
Page 8 of 20