General Use; Setup; Camera Controls - MBTelehealth SX20 User Manual

MBTelehealth –

GENERAL USE

The following sections will provide instructions for using your SX20 to place and receive
videoconference calls.

Setup

1. Turn on the screen/monitor if required.
2. Wake the codec by picking up the remote control, point it
towards the system and press any key. After approximately
15-20 seconds you will see the home screen.
3. Place the microphone on the table in front of the participants.

Camera Controls

The camera can be controlled manually or by using Camera Presets.
On the Home screen press the back arrow to exit the
menu and then control the camera using the arrow +/-
key and the zoom +/- keys on the remote.
TIP
Alternately you can Press the Home key
and select Camera Control. Use the arrows and the zoom +/-
on the remote to move the camera to the desired position.
SX20 Quick Set with TRC5 Remote User Guide
Setup and use the equipment
Adjust Camera Manually
on the remote
Page 6 of 20