Screen Layout: Site To Site - No Presentation; Screen Layout: Site To Site - Presentation Mode - MBTelehealth SX20 User Manual

MBTelehealth –
1.
Plug the AC adaptor into the POD and into an outlet.
Using the HD to VGA adaptor converter that's attached to your equipment, plug
2.
the HDMI end into the back of the POD and the other end to the VGA cable that's
attached to your equipment.
3.
Connect the camera to the POD using the HDMI/HDMI mini cable.
4.
Press the small black power button on the front of the POD. The LED on the
front of the POD will illuminate once both ends of the cables are connected.
5.
Press the presentation key
6.
You should now see the patient camera image displayed on the video
conference monitor.
details on how to use the camera).

Screen Layout: Site to Site - Presentation mode

Screen Layout Site to Site – Presentation
The following menu items are available during presentation mode:

Equal – sites will appear in equal size on the screen

Prominent - your presentation will appear larger than the other site
on your screen

Overlay - your presentation will appear larger and will be overlaid on

the other site

Single - your site will appear full size on your screen
HINT
If you are connected to another piece of equipment that has dual video enabled
they are able to see both of your feeds; both your camera view and your
presentation and will have full control over their own layout.
SX20 Quick Set with TRC5 Remote User Guide
Sharing Content – Patient Camera
Site to Site
HD to VGA adaptor convertor
on the remote.
(View the GlobalMed Patient Camera Quick Reference Guide for more
Menu Items
Page 12 of 20