Far End Control: Site To Site; Screen Layout Site To Site - No Presentation - MBTelehealth SX20 User Manual

Quick set videoconference solution
Hide thumbs Also See for SX20:
Table of Contents

Advertisement

MBTelehealth –

Far End Control: Site to Site

Taking Far End Camera Control allows you to move the camera at the far end site.
Before taking control, always request permission first. You may need to take far end
camera control if:
there is an unskilled operator at the far end
the operator requests that you take control
if the operator isn't able to facilitate the event at their end
1. Press the Home key
2. Use the softkey to select Far End which will enable Far End Camera Control.
3. Move the camera to the desired position using the arrow keys and the zoom +/-
keys.
4. Use the softkey to select Near End which will turn off Far End Control
Alternatively you can select the Exit softkey or the OK key on the remote.
(There is a message in the top left of the screen which lets you know if you are
using NEAR END or FAR END CAMERA CONTROL.)
Screen Layout: Site to Site - No presentation
Screen Layout Site to Site – No Presentation
The Screen Layout key
are displayed on your screen.
Press the Screen Layout key
1. Select Show selfview to display an image of your camera view on
screen and press screen layout again and select Hide selfview to
turn that image off.
2. Press the Move Selfview softkey to move your selfview PIP
around the screen. Each time you press the key the PIP will
move to the next location around the outside of the screen.
3. Press the Maximize Selfview softkey to show your site full screen.
(You will not see the other sites on the screen if you maximize your
selfview.)
Press screen layout again and select the Restore Selfview
to return to the previous screen layout.
HINT
The layout and selfview options are different during site to site and multi-site
events as well as when you are in presentation mode. Therefore the
instructions can be found under each applicable section in the guide.
SX20 Quick Set with TRC5 Remote User Guide
Far End – Site to Site
then select Camera Control.
on the remote control allows you to control how images
to open the Layout Control window.
Page 10 of 20

Advertisement

Table of Contents
loading

Table of Contents