Sharing Content: Patient Camera - Site To Site - MBTelehealth SX20 User Manual

MBTelehealth –
Sharing Content: Laptop - Site to Site
1. There will be VGA/ DVI cable already plugged into the equipment.
Plug the VGA end into your laptop and turn the laptop on.
2. Press Presentation
displayed on the telehealth screen.
3. Press the Presentation key on the remote again to turn off presentation or press the
back arrow on the remote to return to near end control.
4. Remove the VGA cable from the laptop to disconnect.
HINT
If you do not see your PC image, do the following:
on the laptop keyboard, press the Function key
and the appropriate F key (often F5, F8 or F10)
simultaneously. A display options menu will appear,
select the option to display on both as shown.

Sharing Content: Patient Camera - Site to Site

The GlobalMed TotalExam HD camera is the only patient camera that can be used with
this videoconferencing equipment.
Sample equipment
(could be fixed or mobile)
SX20 Quick Set with TRC5 Remote User Guide
Sharing Content – Laptop
Site to Site
on the remote and you should see your laptop
VGA Connector
(Fn)
Page 11 of 20