Sharing Content - Patient Camera Multi Site - MBTelehealth SX20 User Manual

MBTelehealth –
Sharing Content – Patient Camera Multi Site
The GlobalMed TotalExam HD camera is the only patient camera that can be used with
this videoconferencing equipment.
1.
Plug the AC adaptor into the POD and into an outlet.
Using the HD to VGA adaptor converter that's attached to your equipment, plug
2.
the HDMI end into the back of the POD and the other end to the VGA cable that's
attached to your equipment.
3.
Connect the camera to the POD using the HDMI/HDMI mini cable.
4.
Press the small black power button on the front of the POD and both the camera
and the POD should be lit up and functioning.
5.
Press the presentation key
6.
You should now see the patient camera image displayed on the video
conference monitor.
details on how to use the camera).
SX20 Quick Set with TRC5 Remote User Guide
Sharing Content – Patient Camera
Multi Site
HD to VGA adaptor convertor
on the remote.
(View the GlobalMed Patient Camera Quick Reference Guide for more
Page 15 of 20