Table of Contents
Advertisement
MBTelehealth –
BASIC NAVIGATION
The remote control is used to operate your video equipment and the system will not work
without it. Here are some commonly used keys on the remote:
Microphone On/Off.
Adjust volume.
Use the Arrow keys to navigate in
the Menus and the centre OK
key to confirm your selection.
When no menu is open, Arrow
keys are used to move the camera
around.
Use this Home key to display the
Home/Main menu on the screen
– or to exit sub menus.
Use this key to display the Phone
Book on the screen.
Place a call.
Use this key to remove
characters in a text field.
Press to share your
presentation.
Press again to go back to main
camera.
Zoom the camera in and out.
SX20 Quick Set with TRC5 Remote User Guide
Cisco TRC5 Remote
These function keys on the top of the
remote correspond to the five context
softkeys
sensitive
that are found along the
bottom of the screen.
Use this key change the layout on
your screen (includes selfview).
Use this key to end a call.
Outside a call, press and hold to
enter standby mode.
Use the keypad to enter
letters and numbers as with a
mobile phone.
Press a key repeatedly to
access the characters
displayed on each key.
Press and hold this key to toggle
between characters and numbers
when typing in a search field.
Use this key to select or accept an
entry
entry.
Use the back arrow to collapse or
exit a menu.
Waking up the system
Pick up the remote control, point it towards the
system and press any key on the remote to activate
the system.
Page 4 of 20
Advertisement
Table of Contents
