Automatic Time Limitation; Cleaning Protection; Basic Settings - Siemens EH6 MK2 Series Instruction Manual

Automatic time limitation

If the hotplate remains in use for a long time and no changes
are made in the settings, the automatic time limitation function
is triggered.

Cleaning protection

Cleaning the control panel while the range is on may change
the settings.
In order to avoid this, the range has a cleaning protection
function. Press the
control panel is locked for 35 seconds. The surface of the

Basic settings

The device has several basic settings. These settings may be
adapted to the needs of the user.
Indicator Function
Childproof lock
Off.*
On.
Beeps
Most signals deactivated.
Some beeps deactivated.
All beeps activated.*
Automatic timer
Switched off.*
-
Duration of the time program function warning signal
10 seconds*.
30 seconds.
1 minute.
Power-Management function
= Deactivated.*
= 1,000 W minimum power.
. = 1,500 W.
= 2,000 W.
etc.
or
Hotplate time selection
Unlimited: the last hotplate programmed remains selected.*
limited: The hotplate will only remain selected for 10 seconds.
Return to default settings
Personal settings.*
Return to factory settings.
*Factory settings
EURO Appliances - euappliances.info
symbol. An audible signal sounds. The
Automatic shut-off time
. = maximum power of the hob.
The hotplate stops heating. On the hotplate display,
flash alternately.
The indicator goes out when any symbol is pressed. The
hotplate can now be reset.
When the automatic time function is used, it is governed by the
selected power level (from 1 to 10 hours).
control panel can now be cleaned without risk of changing the
settings.
Note: The lock does not affect the main switch. The range may
be switched off when desired.
and
13