Wipe Protection; Automatic Safety Cut-Out - Siemens EX675LYV1E User Manual

Wipe protection

en
kWipe protection
I f you wipe over the control panel while the hob is
W i p e p r o t e c t i o n
switched on, settings may be altered. To avoid doing
this, you can use the hob's "Lock control panel for
cleaning" function.
To activate: Touch the
Ñ
sounds. The control panel is locked for 35 seconds.
You can now wipe over the surface of the control panel
without altering any settings.
To deactivate: The control panel will be unlocked once
35 seconds have elapsed. To release the function early,
touch the Ñ symbol.
Notes
An audible signal sounds 30 seconds after
■
activation. This indicates that the function is about to
finish.
The cleaning lock does not lock the main switch. The
■
hob can be switched off at any time.
24
symbol. An audible signal
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
bAutomatic safety cut-out
I f a hotplate operates for an extended period and no
A u t o m a t i c s a f e t y c u t - o u t
settings are changed, the automatic safety shut-off is
activated.
The hotplate stops heating.
indicator or flash alternately in the hotplate display.
œ •
When you touch any symbol, the display switches off.
The hotplate can now be set again.
The point at which the safety shut-off becomes active
depends on which heat setting has been set (after 1 to
10 hours).
, and the residual heat
" ‰