Familiarise Yourself With The Appliance; The Control Panel; Hotplates - Siemens EH6 MK2 Series Instruction Manual

Absence of pan or unsuitable size
If no pan is placed on the selected hotplate, or if it is made of
unsuitable material or is not the correct size, the power level
displayed on the hotplate indicator will flash. Place a suitable
pan on the hotplate to stop the flashing. If this takes more than
90 seconds, the hotplate will switch off automatically.
Empty pans or those with a thin base
Do not heat empty pans, nor use pans with a thin base. The
hob is equipped with an internal safety system. However, an
empty pan may heat up so quickly that the "automatic switch
off" function may not have time to react and the pan may reach
very high temperatures. The base of the pan could melt and
damage the glass on the hob. In this case, do not touch the

Familiarise yourself with the appliance

These instructions for use are applicable to other hobs. On
page 2 an overview of the models is provided, along with
information on measurements.

The control panel

&RQWURO SDQHOV IRU
DQG FKLOGSURRI ORFN
 WLPH SURJUDP IXQFWLRQ
Æ GHHSIU\LQJ IXQFWLRQ SURJUDPV
Control surfaces
Pressing a symbol activates its corresponding function.

Hotplates

Hotplate
Single hotplate
Double hotplate
Triple hotplate
Use only cookware suitable for induction cooking; see the section on suitable cookware.
6
EURO Appliances - euappliances.info
&RQWURO SDQHOV
IRU
KRWSODWH
VHOHFWLRQ
PDLQ VZLWFK
FOHDQLQJ SURWHFWLRQ IXQFWLRQ
Turning on and off
Always use cookware of a suitable size.
This zone is switched on automatically when using cookware with a base the
same size as the outer zone.
The hotplate is switched on automatically by using a pan with a base that
matches the size of the outer area (
pan and switch the hotplate off. If it fails to work after it has
cooled down, please contact the Technical Assistance Service.
Pan detection
Each hotplate has a minimum limit for detecting pans, which
varies depending on the material of the pan being used. You
should therefore use the hotplate that is most suitable for the
diameter of your pan.
Double or triple hotplate
These hotplates can detect pans of different sizes. Depending
on the material and properties of the pan, the hotplate will
adapt automatically, switching on part or all of the hotplate and
supplying sufficient power to obtain good cooking results.
,QGLFDWLRQV IRU
SRZHU OHYHO³É
IXQFWLRQDOLW\ ¯
UHVLGXDO KHDW ‡¤
SRZHUERRVW IXQFWLRQ °
GHHSIU\LQJ IXQFWLRQ ©
3URJUDPPLQJ SDQHO IRU
SRZHU OHYHO VHOHFWLRQ
DQG WKH WLPH SURJUDP
IXQFWLRQ
Notes
The settings will not change if several symbols are pressed at
the same time. This enables the programming zone to be
cleaned when food is spilt.
Always keep the control surfaces dry. Moisture can affect
proper functioning.
or
&RQWURO SDQHO
IRU
a GHHSIU\LQJ
IXQFWLRQ
) selected for use.