Table of Contents
Advertisement
XYZprinting 3D Food Printer User Manual
2. Introducing product operations
Install the printing
01
chamber cover
The printing chamber cover
is provided together with the
printer. Please refer to the
picture and install the cover
securely.
Plug in the power socket
02
and switch on the printer
The power switch is located at the
side of the printer near the bottom.
Please make sure that the printer is
placed on a stable platform before
plugging it into a power source and
switching it on.
Installing the cartridges
03
in the cartridge chamber
This printer model is capable of
being loaded with 3 cartridges for
3 different material types. Opening
the cover of the cartridge chamber
will reveal 3 slots numbered 1, 2, and
3 from right to left. Cartridges must
be loaded in a proper sequence. You
must start loading from slot 1 before
proceeding to the slot on the left.
If the cartridges are not installed in
this particular sequence (1 to 3), the
carrier will be unable to retrieve the
cartridge (such conditions may arise
when: Only 1 cartridge is placed
in slot 2 or slot 3 while slot 1 is left
empty).
P 6
3
2
1
V1
Advertisement
Table of Contents
