Table of Contents
Advertisement
XYZprinting 3D Food Printer User Manual
Check if the printer has
04
detected the cartridge
Once the cartridge has been in-
●
stalled, return to the Main Screen
to check if the printer has detected
the cartridge.
Cartridges that have been detect-
●
ed by the printer will be colored
to provide easy identification. This
shows that the printer has already
detected the cartridge.
Loading the material plate and tray
05
Please refer to the steps below to combine the material plate and tray
and load them into the printing chamber.
Please slide the front
edge of the tray
diagonally so that it
makes contact with
the rolling wheel.
Placing the lining paper
06
on the material plate
When printing, place the lining paper
on the material plate. The user may also
use double-sided tape to temporarily
secure and smoothen the lining paper.
Note! Unevenness of the lining paper
will severely affect printing quality.
P 7
Orient the tray so
that it becomes
horizontal and slide
it into the printing
chamber (please
make sure that the
tray can slide back
and forth smoothly
on the rolling rail)
Place the material
plate in the center
of the tray (the ori-
enting hole must be
pointing outside).
V1
Advertisement
Table of Contents
