Resetting Defaults; Hardware Maintenance - ATTO Technology Diamond Storage Array V-Class Installation And Operation Manual

5.7 RAID Interleave .....................................................................65
To change the RAID Interleave parameter
5.8 Creating Partitions ...............................................................67
To create a partition
To merge partitions
5.9 Creating Zones .....................................................................69
Principles of Zoning
Factors to consider
Status and Sense Data
Configuring Zones
To create a zone
To remove zones
To change current zones
Other operations
Errors
6.0 Copying Drives ................................................................................73
7.0 Updating Firmware .........................................................................75
Updating firmware via the RS-232 serial port
Updating firmware via the optional Ethernet card
8.0 System Monitoring and Reporting ................................................77
8.1 Troubleshooting ...................................................................81
Windows 2000 special instructions
Error Messages
System Fault LED
Command Line Interface messages
ERROR. Wrong/Missing Parameters
ERROR. Invalid Command. Type 'help' for command list
ERROR. Command Not Processed.
Audible Alarm
Specific situations and suggestions
If a drive fails to respond
If a power supply fails
To determine if the problem exists with the Host Interface Card or the connection
If you can't access the array CLI via Ethernet
If you do not see the appropriate number of LUNs on the host machine

8.2 Resetting Defaults ................................................................83

Default
Return to Default settings
Factory Default
To reset to Factory Defaults, firmware version 2.5.3 or higher

9.0 Hardware Maintenance ...................................................................85

Diamond Storage Array Installation and Operation Manual