ATTO Technology Diamond Storage Array V-Class Installation And Operation Manual page 3

4.0 Accessing the Array .......................................................................17
Command Line Interface
ATTO ExpressNAV
In-band SCSI over Fibre Channel
RS-232 port
Ethernet port
SNMP
4.1 In-band CLI Over Fibre Channel .........................................19
I/O details
4.2 Serial Port Access ................................................................21
4.3 Ethernet Access: Telnet and SNMP Protocols ..................23
To connect to the Ethernet port
To use Telnet
To use SNMP
4.4 ATTO ExpressNAV: Browser-based Interface ...................25
Browser Compatibility
To optimize ExpressNAV in Internet Explorer
To open an ExpressNAV session
To navigate ExpressNAV
4.4.1 ExpressNAV Pages ......................................................27
Status
Ethernet
SNMP
Serial Port
Fibre Channel
Storage Management
RAID
Clear Data
Logical Units
Partitions
Zoning
Rebuild
Configuration
Advanced
To use the Advanced Page CLI commands
Restart
Help
4.5 CLI: Interface via ASCII-based Commands .......................29
4.5.1 Summary of CLI Commands .......................................31
Diamond Storage Array Installation and Operation Manual