ATTO Technology Diamond Storage Array V-Class Installation And Operation Manual page 31

A
CHECK_CONDITION,
INVALID_PARAMETER_IN_CDB
initiator that specifies an incorrect
Exhibit 4.1-1 The SCSI command process: reserve the Diamond Storage Array, send the command, release the
Diamond Storage Array.
Goal: reserve the Diamond Storage Array for an in-band CLI command
SCSI cdb: Reserve LUN 0
Goal: retrieve the Diamond Storage Array temperature via in-band CLI
1. Issue the command:
SCSI cdb: WriteBuffer LUN 0, bid='AA', "get Temperature\n"
2. Retrieve the results:
SCSI cdb: ReadBuffer LUN 0, bid='AA'
Goal: release the Diamond Storage Array for other in-band users
SCSI cdb: Release LUN 0
is returned to an
,
Buffer ID Mode,
Initiator/Host
. The
or
Length Buffer Offset
, the is always
(0x2) Buffer ID
is always
0.
Diamond Storage Array
=>
<= SCSI success
=> places "Temperature=28C\n\r" into
the read-data buffer
<= SCSI success
=>
<= Returns "Temperature=28C\n\r" from
the read-data buffer
<= SCSI success
=>
<= SCSI success
is always
Mode Data
and the
0 Buffer Offset
20
In-band CLI