First Time Configuration (After Download); Simple; Symmetric Model - ATTO Technology Diamond Storage Array V-Class Installation And Operation Manual

Appendix C Sample Zoning Command Sequences

First time configuration (after download)

QuickRAID or JBOD under Zoning "first time" configuration, an all/all/all configuration in the selected
QuickRAID configuration. All zone commands except ZoneCommit affect only the planned configuration.
ZoneCommit sets the Planned Configuration into the Active Configuration.
ZoneClearAll Clears any previously-defined zones
ZoneCommit Sets the new zoning configuration.

Simple

2 hosts, Diamond in JBOD configuration (24 LUNs). Hosts can use different operating systems. All zone
commands except ZoneCommit affect only the planned configuration. ZoneCommit sets the Planned
Configuration into the Active Configuration.
ZoneClearAll
ZoneCreate zone_1
ZoneAddHost zone_1
20:00:00:10:86:00:01:34
ZoneAddDevice zone_1 1 4
ZoneAddPort zone_1 0
ZoneCreate zone_2
ZoneAddHost zone_2
20:00:00:60:00:00:12:34
ZoneAddDevice zone_2 7
ZoneAddPort zone_2 1
ZoneState zone_1 enabled
ZoneState zone_2 enabled
ZoneCommit

Symmetric Model

1 host, 1 switch, Diamond in JBOD configuration (24 LUNs). All host ports travel through a switch to both
Diamond ports. Zoning is not required, since there is no reason to restrict host/HBA/Port access. All zone
commands except ZoneCommit affect only the planned configuration. ZoneCommit sets the Planned
Configuration into the Active Configuration.
ZoneClear all Clears any previously-defined zones from the planned configuration
ZoneCommit Copies what is in the Planned Zoning Configuration to the Active Configuration: in this
case, clears any previously-defined zones.
Clears any previously defined zones from the planned
configuration.
Creates a zone named zone_1
Adds host WWPN to zone_1
Adds LUN 1 and 4 to zone_1
LUN 1 and LUN 4 will be available through HIC 0 for only
the host in zone_1
Creates a zone named zone_2
Adds host WWPN to zone_2
Adds LUN 7 to zone_2
LUN 7 will be available through HIC 1 for only the host in
zone_2
Enables zone_1.
Enables zone_2.
Sets the Planned Zoning Configuration into the Active
configuration. No other LUNs will be available to any host.
Diamond Storage Array Installation and Operation Manual
x