ATTO Technology Diamond Storage Array S-Class Installation And Operating Manual page 9

10.0 System Monitoring and Reporting ..............................................79
10.1 Troubleshooting .................................................................82
10.2 Resetting Defaults ..............................................................85
Appendix A ATA Disk Technology .....................................................i
..
Appendix B Information Commands Results ....................................ii
..
Appendix C Product Safety .................................................................vi
..
Appendix D Specifications ..................................................................vii
..
Appendix E Warranty ...........................................................................viii
..
RS-232 monitoring port and CLI
Ethernet monitoring port and CLI
Power On Self Test (POST)
Ready LED
Audible alarm
Thermal monitoring
Power supply monitoring
System fault LED and error codes
Disk drive activity and disk fault LEDs
Windows 2000 special instructions
Error messages
Specific situations and suggestions
If a drive fails to respond
If a power supply fails
To determine if the problem exists with the HIC
If you can't access the CLI via Ethernet
If LUNs do not display on the host
Default
To return to Default settings
Factory Default
To reset to factory defaults
Safety compliances
EMC specifications
Radio and television interference
Environmental and physical
Rack mount dimensions
Floor mount dimensions
Manufacturer limited warranty
Contact ATTO Technology, Inc.