A
CHECK_CONDITION,
INVALID_PARAMETER_IN_CDB
to an initiator that specifies an incorrect Buffer
Exhibit 5.1-1 The SCSI command process: reserve the Diamond Storage Array, send the command, release the
Diamond Storage Array.
Goal: reserve the Diamond Storage Array for an in-band CLI command
SCSI cdb: Reserve LUN 0
Goal: retrieve the Diamond Storage Array temperature via in-band CLI
1. Issue the command:
SCSI cdb: WriteBuffer LUN 0, bid='AA', "get Temperature\n"
2. Retrieve the results:
SCSI cdb: ReadBuffer LUN 0, bid='AA'
Goal: release the Diamond Storage Array for other in-band users
SCSI cdb: Release LUN 0
will be returned
Initiator/Host
ID, Mode, Length or Buffer Offset. The Mode is
always Data (0x2), the Buffer ID is always 0 and
the Buffer Offset is always 0.
Diamond Storage Array
=>
<=
SCSI success
=>
places "Temperature=28C\n\r" into
the read-data buffer
<=
SCSI success
=>
<=
Returns "Temperature=28C\n\r"
from the read-data buffer
<=
SCSI success
=>
<=
SCSI success
20
In-band CLI
Need help?
Do you have a question about the Diamond Storage Array S-Class and is the answer not in the manual?