Sledfaultled; Virtualdriveinfo - ATTO Technology Diamond Storage Array S-Class Installation And Operating Manual

SledFaultLED

Changes the state of the selected sled LED to the
indicated state.
Choices: enter sled number 1-12 or all, on or off
Default: off
Set syntax: set SledFaultLED [all|sled number] [on| off]

VirtualDriveInfo

Displays the named Virtual Drive definitions. For
examples, refer to Information Commands Results on
page ii.
Immediate command: VirtualDriveInfo [active|planned]
[Virtual Drive ID]
Configure drives with CLI commands
48