Oki MC160N User Manual page 228

Symptom Cause
Some parts When printing enve-
of the image lopes, the zoom ratio
are lost with was specified, and
2in1 copying. then 2in1 copying
was set.
Machine The power cord is not
resets or correctly plugged into
turns off fre- the outlet.
quently.
A system error
occurred.
You are Media or settings are
experienc- not correct.
ing duplex
problems.
Solution
With 2in1 copying, the zoom ratio is
automatically adjusted. For 2in1 copy-
ing on media with a narrow printing
area, such as envelopes, set 2in1
copying, and then adjust the zoom
ratio, if necessary.
Turn off the machine, confirm that the
power cord is correctly plugged into
the outlet, and then turn on the
machine.
Contact Technical Support with the
error information.
Make sure that you are using correct
media.
In the printer driver (Layout/Dou-
ble-Sided), choose "Short Edge Bind-
ing" (flipped as on a clipboard) or
"Long Edge Binding" (flipped as in a
loose-leaf notebook).
Set duplex (Double-Sided) copying.
For details on setting duplex (Dou-
ble-Sided) copying, refer to "Setting
Duplex (Double-Sided) Copying" on
page 118.
For N-up on duplexed pages, choose
Collate only in the printer driver's Basic
Tab. Do not set collation in the applica-
tion.
228 Troubleshooting
Only Letter/A4 plain paper can be
autoduplexed.
Do not duplex envelopes, labels,
postcards, thick stock, letterheads,
or plain paper with a size other than
Letter/A4.
Make sure that you have not mixed
media types in the tray.