Oki MC160N User Manual page 71

RX MODE
FORWARD
FOOTER
SELECT TRAY
71 Control Panel and Configuration Menu
Setting AUTO RX / MANUAL RX
Select whether the reception mode is set to auto-
matic reception or manual reception.
AUTO RX: Automatically begins receiving the fax
after the set number of rings.
MANUAL RX: Does not automatically receive the fax.
Reception begins after making a connection by pick-
ing up the telephone receiver or pressing the On
hook key, then pressing the Start key.
Setting OFF / ON / ON(PRINT)
Select whether or not to forward received fax docu-
ments.
OFF: Select this setting to not forward the document.
ON: Select this setting to forward the received fax
document to the specified fax number or e-mail
address.
ON(PRINT): Select this setting to forward the
received fax document to the specified fax number or
e-mail address at the same time that the machine
prints it.
Setting OFF / ON
Select whether or not the reception information (date
received, number of pages, etc.) is printed at the bot-
tom of each received document.
Setting TRAY1 / TRAY2
Select which paper tray can be used to supply paper
when printing received documents or transmission
reports.
If an optional lower feeder unit is not installed,
this setting is not available.