Oki MC160N User Manual page 227

Symptom Cause
Printing The machine is set to
takes too a slow printing mode
much time. (for example, thick
stock).
The machine is set to
power saving mode.
The job is very com-
plex.
A toner cartridge for a
different region or an
unapproved toner
cartridge is installed
(Wrong Toner X is
displayed in the mes-
sage window).
If an error has been
detected during print-
ing job transmission
in the Copy mode, it
takes a while to pro-
cess the error and
resume the printing
operation.
Blank pages One or more of the
are printed. toner cartridges are
defective or empty.
The wrong media is
being used.
Not all pages A different user acci-
print. dentally canceled the
job.
The tray is empty.
A document is printed
with an overlay file
which has been cre-
ated by an unsuit-
able printer driver.
Solution
It takes more time to print with special
media. When using regular paper,
make sure that the media type is set
properly in the driver.
It takes time for printing to start in
power saving mode.
Wait. No action needed.
Install a correct Oki toner cartridge
approved for your specific machine.
Wait. No action needed.
Check the toner cartridges. The image
will not print correctly or not at all, if the
cartridges are empty.
Check that the media type set in the
driver matches the media loaded in the
machine.
Try printing the remaining pages.
Check that the tray is loaded with
media, in place, and secure.
Print the overlay file using a suitable
printer driver.
227 Troubleshooting